Grainger CEME

Center for Electric Machinery and Electromechanics

2010-2011 Publications

M. Amrhein and P. T. Krein, “Induction machine modeling approach based on 3-d magnetic equivalent circuit framework,” IEEE Trans. Energy Conversion, vol. 25, no. 2, pp. 339–347, 2010.

R. S. Balog and P. T. Krein, “Bus selection in multibus dc microgrids,” IEEE Trans. Power Electronics, vol. 26, no. 3, pp. 860–867, March 2011.

A. M. Bazzi, “Designing better induction motor drive systems from efficiency, reliability, and power electronics perspectives,” Technical Report UILU-ENG-2010-2518, CEME-TR-2010-12, November 2010.

A. M. Bazzi, X. Ding, A. D. Domínguez-García, and P. T. Krein, “Circuit-based reliability models of an induction motor drive under different control schemes,” Proc. IEEE Applied Power Electronics Conf. and Exposition (APEC), 2010, pp. 653–660.

A. M. Bazzi, A. Domínguez-García, P. T. Krein, “A method for impact assessment of faults on the performance of field-oriented control drives: A first step to reliability modeling,” Proc. IEEE Applied Power Electronics Conf. and Exposition (APEC), 2010, pp. 256–263.

A. M. Bazzi, K. Kim, B. Johnson, P. T. Krein, and A. Domínguez-García, “Fault impacts on solar power unit reliability,” Proc. IEEE Applied Power Electronics Conf. (APEC), pp. 1223–1231.

A. M. Bazzi, Z. Klein, K. Kroeger, and M. Sweeney, “Solid-state light simulator,” Technical Report UILUENG- 2011-2503, CEME-TR-2011-02, June 2011.

A. M. Bazzi, Z. Klein, M. Sweeney, K. Kroeger, P. Shenoy, and P. T. Krein, “Solid-state light source simulator under current mode control,” Proc. IEEE Applied Power Electronics Conf. (APEC), pp. 2047–2053.

A. M. Bazzi and P. T. Krein, “Comparative evaluation of machines for electric and hybrid vehicles based on dynamic operation and loss minimization,” Proc. IEEE Energy Conversion Congress and Exposition, 2010, Atlanta, GA, pp. 3345–3351.

A. M. Bazzi and P. T. Krein, “Concerning ‘maximum power point tracking for photovoltaic optimization using ripple-based extremum seeking control,’” IEEE Trans. Power Electronics, pp. 1611–1612, 2011.

A.M. Bazzi and P. T. Krein, “Review of methods for real-time loss minimization in induction machines,” IEEE Trans. Industry Applications, vol. 46, no. 6, pp. 2319–2328, 2010.

V. T. Buyukdegirmenci, “High performance induction machine control: Methods, limits and solutions,” Technical Report UILU-ENG- 2011-2502, CEME-TR-2011-01, April 2011.

V. T. Buyukdegirmenci, A.M. Bazzi, P.T. Krein, “A comparative study of an exponential adaptive perturb and observe algorithm and ripple correlation control for real-time optimization,” Proc. IEEE Workshop on Control and Modeling for Power Electronics (COMPEL), 2010.

C. Chen and A. D. Domínguez-García, “Assessing the impact of wind variability on power system smallsignal reachability,” in Proc. Hawaii Int’l Conf. on System Sciences, Kuaui, HI, January 2011.

C. M. Davis and T. J. Overbye, “Multiple element contingency screening,” IEEE Trans. Power Systems, vol. 26, pp. 1294–1301, 2010.

S. Dhople, J. Ehlmann, A. Davoudi, and P. L. Chapman, “Multiple-input boost converter to minimize power losses due to partial shading in photovoltaic modules,” Proc. IEEE Energy Conversion Congress and Exposition, September 2010, pp. 2633–2636.

A. D. Dominguez-Garcia, “Models for impact assessment of wind-based power generation on frequency control,” in Control and Optimization Theory for Electric Smart Grids, Springer-Verlag, Berlin, 2011.

A. D. Domínguez-García and C. N. Hadjicostis, “Coordination and control of distributed energy resources for provision of ancillary services,” Proc. IEEE Int’l Conf. on Smart Grid Communications, Gaithersburg, MD, October 2010, pp. 537–542.

A. D. Domínguez-García, P. T. Krein, C. N. Hadjicostis, and S. T. Cady, “Small inverter-interfaced distributed energy resources for reactive power support,” in Proc. IEEE Applied Power Electronics Conf. and Exposition, Fort Worth, TX , February 2011, pp. 1616–1621.

A. D. Domínguez-García and Stephan Trenn, “Detection of impulsive effects in switched DAEs with application to power electronics reliability analysis,” Proc. IEEE Control and Decision Conf., December 2010, pp. 5662–5667.

K. A. Kim, P. T. Krein, J. J. Lee, H. Bae and B-H. Cho, “Irradiance and temperature transient sensitivity analysis for photovoltaic control,” Proc. IEEE Int’l Conf. on Power Electronics (ICPE), May 2011, pp. 393–400.

K. A. Kim and P. T. Krein, “Photovoltaic converter module configurations for maximum power point operation,” Proc. IEEE Power and Energy Conf. at Illinois (PECI), 2010, pp. 77–82.

J. Kimball, A. Kwasinski, J. Mossoba, B. Nee, Z. Sorchini, W. Weaver, J. Wells, G. Zhang, A. Bazzi, J. Kolodziej, K. Levin, and P. Rancuret, “Modular inverter for advanced control applications (Revised edition),” Technical Report UILU-ENG-2010-2516, CEME-TR-2010-11, November 2010.

P. T. Krein, “A discussion of data center power challenges across the system,” Proc. IEEE Int’l. Conf. Energy Aware Computing (ICEAC), 2010.

P. T. Krein, “Introduction to power electronics,” Power Electronics: Devices, Circuits, and Applications Handbook, 3rd ed., M. Rashid, Ed., Academic Press, New York, Chapter 1, 2011, pp. 1–16.

P. T. Krein and T. Esram, “Admittance control for anti-islanding protection in modular grid-connected inverters,” Proc. IEEE Workshop on Control and Modeling for Power Electronics (COMPEL), 2010.

O. Kumar, P. S. Shenoy, P. T. Krein, and S. Kapat, “Augmented boost converter for near null-load transient response,” Proc. IEEE Power and Energy Conf. in Illinois, Feb. 2011.

K. Levin, E. Hope and A. D. Domínguez-García, “Observer-based fault diagnosis of power electronics systems,” Proc. IEEE Energy Conversion Congress and Exposition, Atlanta, GA, September 2010, pp. 4434–4440.

T. C. O’Connell and P. T. Krein, “A time-harmonic three-dimensional vector boundary element model for electromechanical devices,” IEEE Trans. Energy Conversion, vol. 25 no.3, pp. 606–618, 2010.

T. J. Overbye and J. D. Weber, “The smart grid and PMUs: Operational challenges and opportunities,” Proc. IEEE Power and Energy Society General Meeting, Minneapolis, MN, July 2010.

H. A. Pulgar-Painemal and P. W. Sauer, “Power system modal analysis considering doubly-fed induction generators,” Proc. IREP Symposium on Bulk Power System Dynamics and Control VIII, Buzios, RJ, Brazil, August 1-6, 2010.

H. A. Pulgar-Painemal and P. W. Sauer, “Type C wind power generator modeling,” Proc. 2010 Electrical Manufacturers and Coil Winding Association Conf. and Exposition, Dallas, TX, Oct 18–20, 2010.

P. Rancuret, “Robust adaptive control of induction machines using the L1 control scheme,” UILUENG- 2010-2515, CEME-TR-2010-10, November 2010

K. M. Rogers, R. Klump, H. Khurana, A. Aquino-Lugo, and T. J. Overbye, “An authenticated control framework for distributed voltage support on the smart grid,” IEEE Trans. Smart Grid, vol. 1, pp. 40–47, January 2010.

H. Seo, S. Sivaramakrishnan, J.-M. Zuo, al. Pang, P. T. Krein, and K. Kim, “Interface analysis of Ti/Al/Ti/ Au ohmic contacts with regrown n+-GaN layers using molecular beam epitaxy,”Wiley Online Library, Article first published online: 13 APR 2011, http://onlinelibrary.wiley.com/doi/10.1002/sia.3758/ abstract, to be published in Surface and Interface Analysis, John Wiley & Sons, Ltd.

P. S. Shenoy, V. T. Buyukdegirmenci, A. M. Bazzi, and P. T. Krein, “System level trade-offs of microprocessor supply voltage reduction,” Proc. IEEE Int’l Conf. Energy Aware Computing (ICEAC), 2010.

P. S. Shenoy and P. T. Krein, “Local control of multiple module dc-dc converters,” Proc. IEEE Workshop on Control and Modeling for Power Electronics (COMPEL), 2010.

P. S. Shenoy and P. T. Krein, “Power supply aware computing,” Proc. IEEE Int’l Conf. Energy Aware Computing, (ICEAC), 2010.

P. S. Shenoy, P. T. Krein, and S. Kapat, “Beyond time-optimality: Energy-based control of augmented buck converters for near ideal load transient response,” Proc. IEEE Applied Power Electronics Conf., Mar.
2011, pp. 916–922.

V. Sithimolada and P. W. Sauer, “Facility-level dc vs. typical ac distribution for data centers: A comparative reliability study,” Proc. TENCON 2010. Fukuoka, Japan, Nov. 21–24, 2010, pp. 2102–2107.

S. Smater and A. D. Domínguez-García, “A unified framework for reliability assessment of wind energy conversion systems,” Proc. IEEE Power and Energy Society General Meeting, Minneapolis, MN, July 2010.

A. Tanwani, A. D. Domínguez-García, and D. Liberzon, “An inversion-based approach to fault detection and isolation in switching electrical networks,” IEEE Trans. Control Systems Technology, vol. 19, pp. 1059–1074, 2011.

D. T. Whipple and P. J. A. Kenis, “Prospects of CO2 utilization via electrochemical conversion,” J. Physical Chemistry Letters, 1, 3451–3458, 2010.

D. T. Whipple, E. C. Finke and P. J. A. Kenis, “Microfluidic reactor for the electrochemical reduction of carbon dioxide: The effect of pH,” Electrochemical and Solid-State Letters, 13, B109-B111 (2010).